- Memory Cards[10]
- RAMs[10]
- MP4 Players[10]
- MP3 Players[10]
- USB Flash Drives[10]
- Storage Holders & Racks[3]
- Rechargeable Batteries[5]
- Digital Batteries[6]
- Contact Person : Mr. Yang Terrence
- Company Name : Shenzhen LYNT Technology Co., Ltd.
- Tel : 0086--755-29812897
- Fax : 0086--755-29812897
- Address : Guangdong,Shenzhen,Rm. 1205, 11th Bldg., Dongquan New Village, Minzhi, Longhua District, Shenzhen, Guangdong, China (Mainland)
- Country/Region : China
DDR2 800 2gb
DDR2 800 2gbDetails:
1) DDR 400/333 & DDRII 533/667/800 MHz2) 168/184/240-pin socket type dual in line memory module (DIMM) .3) 2.6V power supply4) Data rate: 400/333/533/667/800Mbps (max) 5) 2.5 V (SSTL-2 compatible) I/O for DDR I products, 1.8Vpower supply for DDR II products 6) Double-data-rate architecture, two data transfers per clock cycle 7) Bi-directional, differential data strobe (DQS) is transmitted/received with data, to be
used in capturing data at the receiver8) Data inputs and outputs are synchronzed with DQS9) DQS is edge aligned with data for read, center aligned with data for write.10) Differential clock inputs (CK and CK)11) DLL aligns DQ and DQS transitions with CK transitions12) Commands entered on each positive CK edge: Data and data mask referenced to
both edges of DQS.13) Four internal banks for concurrent operation (component). 14) Data mask(DM) for write data. 15) Auto precharge option for each burst access.16) Programmable burst length: 2, 4, 8 17) Programmable/CAS latency (CL): 3 18) Programmable output driver strength: Normal/weak 19) Refresh cycles: (8192 refresh cycles/64ms) .20) 7.8US maximum average periodic refresh interval21) Posted CAS by programmable additive latency for better command and data bus
efficiency 22) Off-chip-driver impedance adjustment and on-die-termination for better signal quality .23) DQS can be disabled for single-ended data strobe operation 24) 2 variations of refresh25) Auto refresh 26) Self refresh
DDR2 800 2gb